HP0-238 Q&A / Study Guide / Testing Engine

Best HP Certification Training and HP Exams Training
and more HP exams log in to Certkingdom.com

---

QUESTION 1
Using the MSA1000 Software Support CD, which installation options do you have? Select TWO.

A. new firmware
B. Windows drivers
C. MSAFlash utility
D. Secure Path
E. ACU-XE

Answer: B,E

---

QUESTION 2
You have a configuration with 3 virtual disks configured in one array. One virtual disk is RAID 0,
one is RAID 5 and one is ADG. Identify the correct statements if one hard drive has failed and you
remove a wrong (running) drive from this array. Select TWO.

A. RAID 5 has data loss when you remove the wrong drive.
B. RAID 5 has data loss after first drive failure.
C. ADG is still online.
D. RAID 5 is still online.
E. ADG has data loss when you remove the wrong drive.

Answer: A,C

---

QUESTION 3
Click the Exhibit button.
On an MSA1000 disk, all LEDs are OFF. What are possible causes for the status and which
actions should you take? Select TWO.


A. The array is performing an online expansion. Do not remove this drive without verifying the
configuration.
B. The drive is not configured as part of an array. You can remove the drive.
C. The array is rebuilding. Do not remove this drive without verifying the configuration.
D. The drive is configured as a hot spare. If needed, you can remove the drive.
E. The drive is part of the selection of the array configuration utility. Do not remove this drive
without verifying the configuration.

Answer: B,D

---

QUESTION 4
Which cable can be used to connect an MSA1000 with I/O-module to a 1 Gb SAN switch?

A. LC to SC
B. SFF to SFP
C. SC to SC
D. LC to LC

Answer: A

---

Best HP Certification Training and HP Exams Training
and more HP exams log in to Certkingdom.com

642-145 Q&A / Study Guide / Testing Engine

Best CCNA Training and CCNA Certification and more
Cisco exams log in to Certkingdom.com

---

QUESTION 1
What is the best practice of configuring an intercom on a shared line?

A. This feature allows all endpoints to participate in intercom messages.
B. This feature can be used only when the intercomephonedn is configured as a dual line
C. This feature is not supported and should not be used
D. This feature can be supported only in a unidirectional manner.
E. This feature allows one endpoint to contact multiple endpoints simultaneously

Answer: C

---

QUESTION 2
Using the show ccn trigger command provides the following output:cue1000#
show ccn trigger
Name: 6800Type: SIPApplication: voicemailLocale:en_US Idle Timeout: 5000Enabled: yes
Maximum number of sessions: 8Name: 6700Type: SIPApplication: autoattendant Locale:en_US
Idle Timeout: 5000Enabled: yes Maximum number of sessions: 8cue1000#
What two pieces of
information can you derive from this output? (Choose two.)

A. The number of ports available is 16
B. The operator can bereachedat extension6800
C. The voicemail pilot point number is 6800
D. The voicemail application is enabled.
E. The idle timeout is 5 seconds

Answer: C,D

---

QUESTION 3
You work as an administrator at your company. You study the exhibit carefully. What type of calls
can the ephone with extension 2151 make?

Exhibit:


A. No impact on out going calls. However, in coming calls will not be permitted to extension
2151unless cor list is configured on the ephonedn
B. Only US calls
C. All calls
D. Internal and emergency calls only, because of the defaultcor restriction.
E. None

Answer: C

---

QUESTION 4
You work as an administrator at your company. You study the exhibit carefully. A user at Acme
Co. reports that when some one leaves a voicemail message, their MWI does not light up. The
administrator has checked the MWI configuration in Cisco Unified Communications Manager
Express and found that the MWI On number is 9001 and the MWI Off number is 9000. Using the
trace output from the Cisco Unity Express module, what is the problem?

Exhibit:


A. The MWI On number configuration is incorrect in Cisco Unity Express
B. The CCN subsystem SIP is incorrect in Cisco Unity Express.
C. The MWI Off Number configuration is incorrect in Cisco Unity Express
D. The SIP is misconfigured in Cisco Unified Communications Manager Express
E. The MWI application is not enabled

Answer: A

---

QUESTION 5
You work as an administrator at your company. You study the exhibits carefully. This proposed
configuration is meant to forward calls to extension 9999 when extension 2001is busy. Which
configuration command will most likely to be edited for this to function properly?
Exhibit #1:

Exhibit #2:


A. max registrations
B. id network mask
C. mailbox
D. voiceregisterpool

Answer: D

---

Best CCNA Training and CCNA Certification and more
Cisco exams log in to Certkingdom.com

SG1-001 Q&A / Study Guide / Testing Engine

Best comptia A+ Training, Comptia A+ Certification at Certkingdom.com

---

QUESTION 1
Which two (2) are advantages of ISL over-subscription? (Choose two.)

A. efficient ISL bandwidth utilization
B. lowers cost-per-port per installation
C. higher performance per ISL
D. enables zoning simplicity
E. more available F_Ports

Answer: A,E

Explanation:

---

QUESTION 2
The SAN audit reports that there is a single fabric in a full mesh topology. Which three (3) benefits
result from migrating to dual fabrics with full mesh topologies? (Choose three.)

A. less inter-switch links
B. simplifies manageability
C. protection from human error
D. reduction in maintenance activity
E. decreased maintenance disruption

Answer: A,C,E

Explanation:

---

QUESTION 3
What two (2) benefits does SCSI Command Tag Queueing provide? (Choose two.)

A. allows I/O requests to be queued to the device
B. determines the most efficient way to order & process commands
C. tags I/O requests so they can be executed first in first out
D. allows SCSI I/O throughput to equal rates of fibre channel
E. determines queue depth position

Answer: A,B

Explanation:

---

QUESTION 4
You have a single fabric with four servers connecting to an edge switch in a core edge
configuration with single 2Gb/s ISLs to the core. Each server has an average throughput
requirement of 40MB/s. Under which circumstance would you need to add a second ISL?

A. to provide a redundant path
B. to avoid congestion on the ISL
C. to separate out FSPF updates
D. to provide a management path

Answer: A

Explanation:

---

QUESTION 5
Two servers have been connected to a SAN with redundant fabrics and the zone configuration
needs to be changed. How can you safely change the zone configuration?

A. Save the current zone configuration to disk, modify it and apply it to both fabrics simultaneously to avoid segmentation.
B. Modify the zone configuration on one fabric, test it, and then modify the zone configuration on the second fabric.
C. Modify the zone configuration on one fabric, test it, and then copy the zone configuration to the second fabric.
D. Modify the zone configuration on both fabrics at the same time, enable them simultaneously to avoid segmentation.

Answer: B

Explanation:

---

Best comptia A+ Training, Comptia A+ Certification at Certkingdom.com