2V0-41.19 VMware Professional NSX-T Data Center 2.4 Exam

Exam Details
The Professional NSX-T Data Center 2.4 exam (2V0-41.19) which leads to VMware Certified Professional – Network Virtualization 2020 certification is a 70-item exam, with a passing score of 300 using a scaled method. Candidates are given an appointment time of 105 minutes, which includes five-minute seating time and adequate time to complete the exam for non-native English speakers. Actual exam time is 100 minutes. Exam Delivery This is a proctored exam delivered at Pearson VUE testing centers, world-wide. For more information, visit the Pearson VUE website. Certification Information For details and a complete list of requirements and recommendations for certification attainment, please reference the VMware Education Services – Certification website. Minimally Qualified Candidate The minimally qualified candidate should have 6 months or more experience installing, configuring, managing, and troubleshooting NSX-T Data Center 2.4 solutions. Candidates should be knowledgeable of the features, functions, and architectures of NSX-T. They should have at least 6 months hands-on experience with Linux and KVM. They should have 1 year of experience working in IT and with VMware vSphere and its command line. The successful candidate will likely hold additional industry-recognized IT certifications or accreditation. The MQC should have all the knowledge contained in the exam sections listed below. Exam Sections VMware exam blueprint sections are now standardized to the seven sections below, some of which may NOT be included in the final exam blueprint depending on the exam objectives.

Section 1 – Architecture and Technologies
Section 2 – Products and Solutions
Section 3 – Planning and Designing
Section 4 – Installing, Configuring, and Setup
Section 5 – Performance-tuning, Optimization, and Upgrades
Section 6 – Troubleshooting and Repairing
Section 7 – Administrative and Operational Tasks

If a section is missing from the list below, please note it is because the exam has no testable objectives for that section. The objective numbering may be referenced in your score report at the end of your testing event for further preparation should a retake of the exam be necessary.
Sections Included in the Exam

Section 1 – Architectures and Technologies - There are no testable objectives for this section
Section 2 – VMware Products and Solutions

Objective 2.1 Describe the VMware Virtual Cloud Network Vision
Objective 2.2 Outline the solutions of NSX Portfolio
Objective 2.3 List the use-cases for NSX Data Center
Objective 2.4 Explain the value proposition and features of NSX
Objective 2.5 Identify Physical and Virtual Infrastructure Requirements for NSX-T Data Center
Objective 2.6 Describe NSX Architecture and Component sub-systems
Objective 2.7 Differentiate the functionalities of Management Plane, Control Plane, Data Plane, and Consumption Planes
Objective 2.8 Define NSX-T Data Center Terminology
Objective 2.9 Describe the Logical Switching Architecture and Features
Objective 2.10Describe the Logical Routing Architecture and Features
Objective 2.11Describe the NSX-T Data Center Network Services
Objective 2.12 Explain the Edge Architecture and Features
Objective 2.13 Explain the NSX Security Architecture and Features
Objective 2.14 Identify the supported integration platforms of NSX-T (Containers, Public Cloud, Private Cloud, Hybrid Cloud, DevOps tools, 3rd Party etc.)

Section 3- Planning and Designing - There are no testable objectives for this section

Section 4 – Installing, Configuring, and Setup
Objective 4.1 Outline the installation and preparation workflow of NSX-T Data Center
Objective 4.2 Deploy and Configure NSX-T Data Center Environment
Objective 4.3 Configure Hypervisor Networking [vSphere and KVM] for NSX-T Data Center
Objective 4.4 Configure and manage Logical Switching Features
Objective 4.5 Configure and manage Logical Routing Features
Objective 4.6 Configure NSX-T Edge Nodes and Edge Cluster
Objective 4.7 Configure NSX-T Data Center Network Services [Layer-3]
Objective 4.8 Configure NSX Security Features
Objective 4.9 Configure Service Insertion with NSX-T Data Center

Section 5 – Performance-tuning, Optimization, Upgrades - There are no testable objectives for this section

Section 6 – Troubleshooting and Repairing
Objective 6.1 Identify the default log file locations of NSX-T Data Center components
Objective 6.2 Compare and Contrast Tools Available for Troubleshooting
Objective 6.3 Troubleshoot Common NSX Installation/Configuration Issues
Objective 6.4 Troubleshoot Common NSX Component Issues
Objective 6.5 Troubleshoot Common Connectivity Issues
Objective 6.6 Troubleshoot Common physical infrastructure Issues

Section 7 – Administrative and Operational Tasks
Objective 7.1 List Operations Tasks in a VMware NSX Environment (syslog, backup/restore etc.)
Objective 7.2 Configure roles and permissions for NSX-T Data Center environment
Objective 7.3 Generate Log bundles
Objective 7.4 Monitor a VMware NSX Implementation

QUESTION 1
Which two commands are used to query the arp-table of a logical switch? (Choose two.)

A. get logical-switch arp-table
B. get logical-switch arp-table
C. get logical-switch arp-table
D. get logical-switch arp-table
E. get logical-switch arp-table

Correct Answer: A,B


QUESTION 2
When a stateful service is enabled for the first time on a Tier-0 Gateway, what happens on the NSX Edge node?

A. SR and DR doesn't need to be connected to provide any stateful services.
B. SR is instantiated and automatically connected with DR.
C. SR and DR is instantiated but requires manual connection.
D. DR is instantiated and automatically connected with SR.

Correct Answer: B

QUESTION 4
A security administrator needs to configure a firewall rule based on the domain name of a specific application.
Which field in a distributed firewall rule does the administrator configure?

A. Policy
B. Profile
C. Service
D. Source

Correct Answer: B

Explanation:
On the Profile page, choose which profiles to apply the rule to. For most servers, you should apply the rule to
all three profiles, because servers are usually continually connected to a single network. For mobile computers
in domain environments, you typically need to apply firewall rules only to the Domain profile.

QUESTION 5
What are two supported VPN configuration types in a NSX-Y Data Center? (Choose two.)

A. OpenVPN
B. MPLS
C. L3VPN
D. L2VPN
E. SSLVPN+

Correct Answer: CE
Click here to view complete Q&A of 2V0-41.19 exam
Certkingdom Review, Certkingdom PDF Torrents

Best VCP-NV 2019 2V0-41.19 Certification, VCP-NV 2019 2V0-41.19 Training at certkingdom.com

VCS-279 Administration of Veritas NetBackup 8.1.2 and NetBackup Appliances 3.1.2 Exam

Although each product varies in complexity and depth of technical knowledge, all certification exams target customers in an administrative role, cover core elements measuring technical knowledge against factors such as configuration, product administration, day-to-day monitoring, maintenance, and basic troubleshooting (diagnosis and/or repair).

This program consists of technical exams at a product/version level that validate that the successful candidate has knowledge and skills necessary to configure and maintain NetBackup version 8.1.2 and NetBackup Appliances 3.1.2.

Passing this exam will result in a Veritas Certified Specialist (VCS) certification and counts towards the requirements for a Veritas Certified Professional (VCP) certification in Data Protection.

Exam Details
# of Questions: 80 - 90
Exam Duration: 105 minutes
Passing Score: 65%
Languages: English
Exam Price: $225 USD (or your country’s currency equivalent)

Recommended Courses:
Veritas NetBackup 8.1.2: Administration
Veritas NetBackup 8.1.2: Advanced Administration
Veritas NetBackup Appliances 3.1.2: Configuration and Management

Note: If you do not have prior experience with this product, it is recommended that you complete an in-person, classroom training or Virtual Academy virtual classroom training class in preparation for the VCS exam. Be cautioned that attendance in a training course does not guarantee passage of a certification exam.

Recommended preparation steps:
Exam Preparation Guide (PDF): Download and review the guide to understand the scope of topics covered in the certification exam and how they map to the key lessons and topics in the associated training course(s).
Attend recommended training classes listed above.
Gain hands-on experience with the product. 6-9 months experience administering NetBackup 8.1.x and NetBackup Appliances 3.1.x is recommended.
Sample Exam (PDF): Test yourself and your exam-taking skills using the sample exam.

In addition, you should be familiar with the following product documentation
Veritas NetBackup 8.1.2 Release Notes
Veritas NetBackup 8.1.2 Compatibility Lists
Veritas NetBackup 8.1.2 Administrator's Guide, Volume I
Veritas NetBackup 8.1.2 Installation Guide
Veritas NetBackup 8.1.2 Upgrade Guide
Veritas NetBackup Deduplication Guide
Veritas NetBackup Cloud Administrator’s Guide
Veritas NetBackup Commands Reference Guide
Veritas NetBackup Backup, Archive and Restore Getting Started Guide
Veritas NetBackup Read This First Guide for Secure Communications
Veritas NetBackup Security and Encryption Guide
Veritas NetBackup Status Codes Reference Guide
Veritas NetBackup Troubleshooting Guide
Veritas NetBackup Appliance 3.1.2 Administrator’s Guide
Veritas NetBackup Appliance Upgrade Guide
Veritas NetBackup Appliance Security Guide
Veritas Appliance Management Guide
Veritas NetBackup Appliance Capacity Planning and Performance Tuning Guide
Veritas NetBackup Appliance Troubleshooting Guide
NetBackup 8.1.2 Product Documentation
Appliances 3.1.2 Product Documentation
NetBackup Product Page
NetBackup Appliances Product Page
NetBackup 8.1.2 Updates, Patches and News
Appliances 3.1.2 Updates, Patches and News
Veritas Communities

Recommended hands-on experience (real world or virtual):
Describe basic NetBackup architecture
Describe the functionality of NetBackup product features, options, transport modes, and advanced file system backup methods (e.g., Bare Metal Restore (BMR), NetBackup Vault, Enterprise Client, SAN Client, Cloud, OpsCenter, Database agents, virtual machine protection, Media Server and client-side Deduplication, OST, NetBackup Accelerator, Storage Lifecycle Policies, AIR, Replication Director, and NetBackup Access Control)
Configure core components of NetBackup including devices, storage units, volumes, and volume pools using the NetBackup Administration Console
Configure storage servers and disk pools including media server and client-side deduplication
Describe the functionality of NetBackup Appliances
Configure backup policy attributes, schedules, clients, and backup selection lists
Run and monitor backups, duplications, replications and restores
Monitor, configure and manage NetBackup Appliances including Appliance Shell Menu (CLISH) and Appliance Web Console
Describe the functionality of the Appliance Management Server (AMS)
Monitor daily activity and availability of the NetBackup environment by analyzing reports and reviewing activity logs
Verify tape drive operation and maintain media rotation and availability
Manage and maintain disk storage devices
Troubleshoot or diagnose basic NetBackup issues
Access and install NetBackup release updates
Access NetBackup documentation and the online Knowledge Base
Configure a backup of the NetBackup catalog
Modify basic NetBackup behavior using host properties (e.g., jobs per client, general attributes, media overwrite)
Configure Storage Lifecycle Policies including AIR
Configure Protection Plans

QUESTION 2
An administrator has a backup for client Linux1 using the LinuxClients policy complete successfully. Even
though the policy Backup Selections are NOT modified, the backup job fails the next day with the following status code:
Error 71: none of the files in the file list exist.
What is a possible reason the job failed?

A. The “Enable granular recovery” option was unset.
B. The client was added to another backup policy.
C. The file systems have been unmounted on the client.
D. The client was temporarily shut down.

Correct Answer: C

QUESTION 4
What is the maximum age of the host's Certificate Revocation List (CRL) before communication with the host is prevented?

A. 48 hours
B. 5 days
C. 7 days
D. 30 days

Correct Answer: C

QUESTION 5
Upon arriving at work on a Monday, an administrator sees several replication jobs that have failed with the following error message:
no images were successfully processed
Which two reasons may be the cause for the error code? (Choose two.)

A. The checkpoint restart is disabled for the replication jobs.
B. There are network connectivity issues between the source and target domains.
C. The NetBackup host ID-based certificate was revoked.
D. There is insufficient storage space on the target storage server.
E. There are insufficient tapes in the replication volume pool.

Correct Answer: B,D

QUESTION 6
NetBackup has frozen some of the tapes added to the robot.
Which log must be enabled to determine why the tapes were frozen?

A. ltid
B. robots
C. bptm
D. vmd

Correct Answer: C

QUESTION 7
What is the definition of a Storage Unit?

A. It is a label that lets the administrator create a storage plan.
B. It is a label that the Media Manager associates with physical storage.
C. It is a label that defines where storage is physically located.
D. It is a label that NetBackup associates with physical storage.

Correct Answer: D

Click here to view complete Q&A of VCS-279 exam
Certkingdom Review, Certkingdom PDF Torrents

Best Veritas NetBackup VCS-279 Certification, Veritas NetBackup VCS-279 Training at certkingdom.com

4A0-101 Nokia Interior Routing Protocols Exam

Exam Name: Nokia Interior Routing Protocols
Exam Number: 4A0-101
Credit Towards Certifications: Nokia Network Routing Specialist II
Nokia Service Routing Architect
Mandatory Exam Prerequisites: N/A
Exam Duration: 90 Minutes
Exam Appointment Duration: 135 minutes. This is the exam duration plus a 45 minute tutorial on computer-based examinations.
Number of Questions: 60
Language: English

For a list of candidate exam topics, please refer to the list of course objectives and modules in the course outline. The course overview page and course outline can be found here.

Exam exemptions are available for individuals with IP certifications from other organizations. Refer to the following link for additional details: Credit for Other IP Certifications.

Price: $125 USD based on exam delivery in North America. Pricing in other countries may vary slightly depending on country location.

Exams are delivered by our external test delivery partner, Pearson VUE. For more information, access their website at www.pearsonvue.com/nokia.

QUESTION 1
When a router receives an IP packet, but does not find a match in the routing table for the destination IP address, what actions are performed by the router?

A. The packet is flooded out all router interfaces.
B. The packet is dropped and an ICMP unreachable message is sent back to the source.
C. The packet is silently discarded.
D. The packet is flooded out all interfaces and an ICMP unreachable message is sent.

Answer: B

Section: Volume A

QUESTION 2
Which of the following statements regarding distance vectors protocols are true?
(Choose two.)

A. RIPv1, RIPv2, and BGP are distance vector protocols.
B. OSPF and IS-IS are distance vector protocols.
C. Routing tables are exchanged between neighbors; however, no routing table is transmitted beyond the immediate neighbor.
D. Distance vector protocols use the Dijkstra SPF algorithm.
E. Routers that participate in distance vector routing protocols maintain full knowledge of distant routers and how they interconnect

Answer: A,C

QUESTION 3
In an IP datagram, which of the following fields identifies the receiving application?

A. The protocol field of the transport layer header.
B. The port field of the transport layer header.
C. The protocol field of the network layer header.
D. The port field of the network layer address.

Answer: B

QUESTION 4
Static routing will be used in a network between a corporate head office, with many connected networks, and a
branch office, with one connection to the head office. Which of the following best describes the likely configuration?

A. The corporate head office router will have a default route and the branch site will have a more specific static route.
B. The corporate head office router and the branch office router will both have specific static routes.
C. The corporate head office router and the branch router will both have default routes.
D. The corporate head office router will have a more specific static route and the branch office router will have a default route.

Answer: D

Click here to view complete Q&A of 4A0-101 exam
Certkingdom Review, Certkingdom PDF Torrents

Best Nokia SRC Certification 4A0-101 Certification, Nokia SRC Certification 4A0-101 Training at certkingdom.com